1 - PAXCON being applied to wall

2 - Dummy in untreated area

3 - Explosion

4 - Explosion

5 - Treated and Untreated walls during explosion

6 - Untreated wall during explosion

7 - Untreated wall after explosion

1- Deflection Process

2- Wall Deflection Measurement

3- Exterior PAXCON Treated and Untreated Wall

4- Exterior PAXCON treated and untreated wall

5- Close up of 200lbs of TNT and 5lbs of C4

6- Exterior PAXCON Treated and Untreated Wall

7- Dummy Set Up

8- Inside Explosion - Untreated Area

9- Inside Explosion - Untreated Area

10- Inside Explosion - Untreated Area

11- After Explosion

12- After Explosion

1- Armor Steel Coated with PX2100 in Fixture with Witness Plate

2- Armor Steel Coated with PX2100 in Fixture with Witness Plate

3- Armor Steel Coated with PX2100 in Fixture with Witness Plate

4- Armor Steel Coated with PX2100 in Fixture with Witness Plate

5- Armor Steel Coated with PX2100 in Fixture with Witness Plate

6- Armor Steel Coated with PX2100 in Fixture with Witness Plate

7- Close up of PX2100 After Being Shot with Bullet

8- Close up of PX2100 After Being Shot with Bullet

9- Close up of Armor Steel without PX2100. Spall Damage to Witness Plate

10- Close up of Armor Steel without PX2100. Spall Damage to Witness Plate

11- Close up of Armor Steel without PX2100. Spall Damage to Witness Plate

12- Close up of Armor Steel without PX2100. Spall Damage to Witness Plate

13- Close up of Armor Steel without PX2100. Spall Damage to Witness Plate

14- Close up of Armor Stell. No PX2100, coated with Spray Paint

15-Close up of Armor Steel with Spall Damage to Witness Plate

1- Test walls Pre-Blast (PX3350 on right)

2- Test walls Pre-Blast (PX3350 on right) 2

3- PX3350 Treated Test Wall - Pre Blast

4- PX3350 treated wall after blast

5- Untreated Test Wall - Pre Blast

6- Test Walls after Blast PAXCON treated wall on Left

7- Untreated Wall After Blast